Basic Info.
Manicure Pedicure Kit nail art machine
| Rated voltage range: |
220-240v 50hz |
| Rated power input: |
15w |
| Output rated voltage: |
DC 0-18V |
| Output current: |
1.0A |
| Working voltage: |
DC 0-18V |
| Rated current: |
1.0A |
| No load speed: |
29000-30000rpm |
| Load speed: |
27000-28000rpm |
ℹ️ Instructions:
▪
Don't change the turning directions too frequently, otherwise it will damage the grinding head.
▪
Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.
▪
After operation, put the grinding head on the top of the main panel.
▪
While the grinding head is in operation, never pull out the 5-pin plug of the portable grinding head.
▪
For long idle time, please disconnect the source power.
▪
Any unauthorized disassembling is prohibited. In case of any breakdown, please contact the agent or authorized repair center, we promise swift, high-quality and satisfactory service.
▪
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
▪
The apparatus is not ready for the physically weak, slow response or a mental disorder of persons (including children) to use, except in the security responsibility of the guidance or assistance.
Frequently Asked Questions
Q
What is the rated voltage range and input power of this nail art machine?
The main power supply and control part has a rated voltage range of 220-240v 50hz with a rated power input of 15w.
Q
What are the speeds of the handpiece?
The handpiece features a no-load speed of 29,000-30,000 rpm and a load speed of 27,000-28,000 rpm.
Q
How should I safely turn off the machine after use?
Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to the minimum level before switching the main power source to 0.
Q
Can I pull out the 5-pin plug when the grinding head is running?
No. Never pull out the 5-pin plug of the portable grinding head while the grinding head is in operation.
Q
What precautions should I take regarding the turning directions?
Avoid changing the turning directions too frequently to prevent damage to the grinding head.
Q
What should I do if the power supply cord is damaged?
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid potential safety hazards.
Plek Beauty
